1 rf driver amplifier 250 - 4000 mhz rev. v1 maam-009286 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? +42 dbm output ip3 ? broadband operation ? lead-free sot-89 package ? halogen-free ?green? mold compound ? rohs* compliant and 260c reflow compatible ? class 2 esd rating description the maam-009286 rf driver amplifier is a gaas mmic which exhibits excepti onal linearity, as well as high gain in a lead-free sot-89 surface mount plastic package. broadband operation over the 250 to 4000 mhz range is achieved using external matching components as shown in the pcb layout. different component values may be needed to optimize performance at different center frequencies. the device is biased with a single +5 volt supply and consumes 155 ma typically. the maam-009286 is fabricated using an hbt process to realize low current and high linearity. the process features full passivation for increased performance and reliability. pin configuration pin no. function pin no. function 1 rf input 3 rf output/bias 2 ground part number package MAAM-009286-000000 bulk packaging maam-009286-tr3000 3000 piece reel maam-009286-001smb sample board functional schematic * restrictions on hazardous substanc es, european union directive 2002/95/ec. parameter maximum operating conditions junction temperature 4 170c rf output power 27 dbm operating temperatur e -40c to +85c parameter absolute maximum rf output power 28 dbm voltage 6 volts storage temperature -65c to +150c junction temperature 210c 5. exceeding any one or combination of these limits may cause permanent damage to this device. 6. m/a-com technology does not recommend sustained operation near these su rvivability limits. rf in rf out pin 1 rf in rf out / bias pin 1 rf in rf out pin 1 rf in rf out / bias pin 1 maximum operating conditions 3 ordering information 1,2 absolute maximum ratings 5,6 1. reference application note m513 for reel size information. 2. all sample boards include 5 loose parts. 3. these operating conditions will ensure mttf > 1 x 10 6 hours. 4. junction temperature (t j ) = t a + ? jc * ((v * i) - (p out - p in )) typical thermal resistance ( ? jc) = 70 c/w a) for t a = 25c, t j = 76 c @ 5 v, 170 ma, p out = 21 dbm, p in = 5.5 dbm b) for t a = 85c, t j = 125 c @ 5 v, 140 ma, p out = 21 dbm, p in = 6.2 dbm
2 rf driver amplifier 250 - 4000 mhz rev. v1 maam-009286 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications : freq. = 2140 mhz, t a = +25c, v cc = +5 v, z 0 = 50 parameter units min. typ. max. gain db 14 15.5 ? noise figure db ? 3.5 ? input return loss db ? 11 ? output return loss db ? 13 ? output p1db dbm ? 27 ? output ip3 p in = -6 dbm / tone, 1 mhz spacing dbm 40 42 ? quiescent current ma ? 155 ? current (p in = -3 dbm) ma ? 155 225 2140 mhz pcb layout 2140 mhz schematic parts list part value case style c1 12 pf 0402 c2 2.2 pf 0402 c3 0.1 f 0402 c4 1000 pf 0402 c5 39 pf 0402 c6 1.2 pf 0402 l1 7.5 nh 0402 r1, r2 0 ? 0402 cross section view the pcb dielectric between rf traces and rf ground layers should be chosen to reduce rf discontinuities between 50 ? lines and package pins. m/a-com recommends an fr-4 dielectric thickness of 0.008? (0.20 mm) yielding a 50 ? line width of 0.015? (0.38 mm). the recommended rf metalization is 1 ounce copper.
3 rf driver amplifier 250 - 4000 mhz rev. v1 maam-009286 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. typical performance curves, 2140 mhz configuration input return loss output return loss noise figure p1db output ip3 gain -20 -15 -10 -5 0 2.00 2.05 2.10 2.15 2.20 2.25 2.30 +25c -40c +85c frequency (ghz) 10 12 14 16 18 20 2.00 2.05 2.10 2.15 2.20 2.25 2.30 +25c -40c +85c frequency (ghz) -20 -15 -10 -5 0 2.00 2.05 2.10 2.15 2.20 2.25 2.30 +25c -40c +85c frequency (ghz) 0 1 2 3 4 5 6 2.00 2.05 2.10 2.15 2.20 2.25 2.30 +25c -40c +85c frequency (ghz) 10 12 14 16 18 20 0 5 10 15 20 25 30 +25c -40c +85c p out (dbm) 10 20 30 40 50 60 024681012141618202224 +25c -40c +85c p out (dbm/tone)
4 rf driver amplifier 250 - 4000 mhz rev. v1 maam-009286 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. lead-free sot-89 plastic package ? ? reference application note m538 for l ead-free solder reflow recommendations. meets jedec moisture sensitivity level 1 requirements. plating is 100% matte tin over copper. handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these class 2 devices. typical performance curves, 2140 mhz configuration current 0 50 100 150 200 250 300 350 0 5 10 15 20 25 30 +25c -40c +85c p out (dbm)
|
